013 - Dump

bart013 · 09-22-2006, 12:28 PM

im opening a dump so i dont need to make new topics

(admin if this is not ok delete it

)

this is a HE/thermite bomb, polycount is something in 500, next step is texturing it

chris holden · 09-22-2006, 12:37 PM

What's the purpose of the additional Cap Segment in the Cylinder?

doylle · 09-22-2006, 01:01 PM

Before you start with your texture you might want to optimize your object first. First of the 3 sections on top are a complete waste of polys, and since you're using a cilinder with quite some side's (which is ok since this is probably a first person model) this numer will be significant. Same going on with some poly's on a straight group of polys at the grip. It also looks like you chamfered the edges of your grip, which is only visible on the wireframe, so it doesn't make much sence to me. And then there's that little round thing you have. I didn't find it on any picture on the interent, so i'm guessing you just placed it there. Now, if you change all the above, you will find yourself in a situation where you have quite some extra poly's free for you to use. I suggest you use them on the fore end of the grip (or whatever it's called). It looks to simplified on your model.

GL
and keep us posted...

bart013 · 09-23-2006, 03:06 AM

update:

couple changes not needed poly`s deleted(tnx for tip doylle)
what do you guys think?

SnowFella · 09-23-2006, 06:24 AM

Looks good although there still seems to be polys there that could be removed without altering the shape.
As Doyle mentioned remove the bevel on the grip as it's so small you can't see it in the render. Also the lowest edgeloop on the grip can be removed as it doesn't add to the shape at all. There also seem to be unnessesary faces left ontop of the cylinder, infront of the grip.

bart013 · 09-24-2006, 04:37 AM

now i deleted that weird bevel on the grip, and i deleted some poly`s you dont see in the game its ready to be textured

and about those weird poly`s at the cilinder, c4d doesnt count them as pol`s and i cant see them that is just 1 big round poly in c4d

but it doesnt mind if he doesnt count them as poly`s

09-22-2006, 12:28 PM	#1 (permalink)
bart013 Artist 33 - 1	013 - Dump im opening a dump so i dont need to make new topics (admin if this is not ok delete it) this is a HE/thermite bomb, polycount is something in 500, next step is texturing it Last edited by doylle; 09-22-2006 at 12:33 PM. Reason: Prefix

09-22-2006, 12:37 PM	#2 (permalink)
chris holden Senior Artist 468 - 164	What's the purpose of the additional Cap Segment in the Cylinder? __________________ Chris Holden It Wasn't Your Day Comics

Bookmarks
Digg	del.icio.us	StumbleUpon	Google

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2006, 01:01 PM	#3 (permalink)
doylle Game-Artist.net Admin 2,484 - 359	Before you start with your texture you might want to optimize your object first. First of the 3 sections on top are a complete waste of polys, and since you're using a cilinder with quite some side's (which is ok since this is probably a first person model) this numer will be significant. Same going on with some poly's on a straight group of polys at the grip. It also looks like you chamfered the edges of your grip, which is only visible on the wireframe, so it doesn't make much sence to me. And then there's that little round thing you have. I didn't find it on any picture on the interent, so i'm guessing you just placed it there. Now, if you change all the above, you will find yourself in a situation where you have quite some extra poly's free for you to use. I suggest you use them on the fore end of the grip (or whatever it's called). It looks to simplified on your model. GL and keep us posted...

09-23-2006, 03:06 AM	#4 (permalink)
bart013 Artist 33 - 1	update: couple changes not needed poly`s deleted(tnx for tip doylle) what do you guys think?

09-23-2006, 06:24 AM	#5 (permalink)
SnowFella Freelancer 96 - 8	Looks good although there still seems to be polys there that could be removed without altering the shape. As Doyle mentioned remove the bevel on the grip as it's so small you can't see it in the render. Also the lowest edgeloop on the grip can be removed as it doesn't add to the shape at all. There also seem to be unnessesary faces left ontop of the cylinder, infront of the grip.

09-24-2006, 04:37 AM	#6 (permalink)
bart013 Artist 33 - 1	now i deleted that weird bevel on the grip, and i deleted some poly`s you dont see in the game its ready to be textured and about those weird poly`s at the cilinder, c4d doesnt count them as pol`s and i cant see them that is just 1 big round poly in c4d but it doesnt mind if he doesnt count them as poly`s