Polypaint error.

Matīss_Sola · 16-08-2012, 07:08 AM

Hello guys!
Well basically im facing this weird artifact.
I don't know how to fix it.
When i was painting i also saw those weird streaks.

<a href="http://imgur.com/m4ScV"><img src="http://i.imgur.com/m4ScV.jpg" alt="" title="Hosted by imgur.com" /></a>

Mr.Cash · 19-08-2012, 07:01 AM

Dunno what kind of error it is, cause I'm not very familiar with zBrush (?), but I'll post a working image of your problem

David_Sola · 19-08-2012, 03:49 PM

move a bit layer slider to left or right side and then bake layers.It is zbrush glitch or smth.

EBU · 21-08-2012, 04:51 PM

you might have clicked "bake all" while layer recording is active.
try to exit recording mode when baking.

Matīss_Sola · 22-08-2012, 02:57 AM

Yap,that was the thing.

Thank you guys

16-08-2012, 07:08 AM	#1 (permalink)
Matīss_Sola New Member 8 - 1	Polypaint error. Hello guys! Well basically im facing this weird artifact. I don't know how to fix it. When i was painting i also saw those weird streaks. <a href="http://imgur.com/m4ScV"><img src="http://i.imgur.com/m4ScV.jpg" alt="" title="Hosted by imgur.com" /></a> Last edited by Matīss_Sola; 19-08-2012 at 06:20 AM.

19-08-2012, 07:01 AM	#2 (permalink)
Mr.Cash Senior Member 233 - 1,140	Dunno what kind of error it is, cause I'm not very familiar with zBrush (?), but I'll post a working image of your problem __________________ Portfolio BLOG

21-08-2012, 04:51 PM	#4 (permalink)
EBU Senior Member 156 - 56	you might have clicked "bake all" while layer recording is active. try to exit recording mode when baking. __________________ portfolio http://www.wix.com/ebnelkimtada190/ebu3d

Bookmarks
Digg	del.icio.us	StumbleUpon	Google

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19-08-2012, 03:49 PM	#3 (permalink)
David_Sola New Member 63 - 313	move a bit layer slider to left or right side and then bake layers.It is zbrush glitch or smth.

22-08-2012, 02:57 AM	#5 (permalink)
Matīss_Sola New Member 8 - 1	Yap,that was the thing. Thank you guys