SMC #52 - October 5 - October 12 - Ammunition Pickup - Page 5

Soulis · 10-10-2008, 04:49 AM

Hi everyone, i've been following these comps for a while and finally decided to get in on this one. I'm still practicing to getting faster, as I ran out of time pretty quickly it seemed like. Also need to work on cutting down on unnecessary polys, of which I had tons of this time.

My entry is a WW2 Haversack and M1 Garand Ammo. Not very original i'll grant, but i'll try and do something more creative for a second entry or the next modeling challenge.

Craig Lewis · 10-10-2008, 06:54 AM

Quote:

Originally Posted by diamond

Are download links or attachments of .max files allowed in SMC entries?

You can include it if you want to, but you must include a picture in your post. You couldnt expect everyone to have to download your model and open it up before deciding who to vote for.

peirix · 10-10-2008, 12:33 PM

Nailgun. You can't beat the fun you can create with one...

Since this one was so basic, it only took 40 mins... Poly count in screenshot, but if you can't see, it's: 5970. Most of them are the actual nails, which are 8-sided cylinders...

just photoshopped to get wireframe and shaded in same image...

Jimi · 10-10-2008, 02:03 PM

Made another one.. this is a 4-pack box for disc launcher. Each magazine contain 11 discs that are 5cm radius and 1cm thick. The magazine + disc took 10 minutes and the box took 80 minutes to do. Ingame box model probably wouldn't have the insides modelled (no point hiding ~1000 polygons in it), but the magazines can appear as separate pickups.

KING-TAHARKA · 10-10-2008, 11:13 PM

i changed the image in my previous entry...

no more fancy stuff...

any way here is another... i made it before that first one... it was not that nice... post it any way...

grenade crate... or something like that... actually i did not know what to put in it...

looks like some futuristic egg box..

the tri count is the total of both boxes...

swag · 11-10-2008, 03:18 PM

Decided to go with something a little different, some Shurikens. I also made a small box to hold them in, even though in reality they would be put into a pouch.

I started making the Shurikens with a star spline, then used the edit spline modifier to add some details. Extruded and fleshed them out with editpoly then made the box with a cylinder, again using extrusions, bevels, and insets. The feather was made with a spline with was then extruded, in a similar fashion as the Shurikens.

That's about it, been a while since I did one of these.

Aegis · 12-10-2008, 07:28 AM

Booo. Runned out of time. Anyway. Here it is.

10-10-2008, 02:03 PM	#44 (permalink)
Jimi Senior Member 1,036 - 106	Made another one.. this is a 4-pack box for disc launcher. Each magazine contain 11 discs that are 5cm radius and 1cm thick. The magazine + disc took 10 minutes and the box took 80 minutes to do. Ingame box model probably wouldn't have the insides modelled (no point hiding ~1000 polygons in it), but the magazines can appear as separate pickups. __________________ zbang! My 3d sketchbook - Swamp Warrior

10-10-2008, 11:13 PM	#45 (permalink)
KING-TAHARKA Senior Member 238 - 27	i changed the image in my previous entry... no more fancy stuff... any way here is another... i made it before that first one... it was not that nice... post it any way... grenade crate... or something like that... actually i did not know what to put in it... looks like some futuristic egg box.. the tri count is the total of both boxes... __________________ Narrow minded people generalizes characteristic intends...? CREATURE SKETCH WORK STEPS Last edited by KING-TAHARKA; 20-05-2009 at 01:44 AM.

11-10-2008, 03:18 PM	#46 (permalink)
swag Senior Member 702 - 248	Decided to go with something a little different, some Shurikens. I also made a small box to hold them in, even though in reality they would be put into a pouch. I started making the Shurikens with a star spline, then used the edit spline modifier to add some details. Extruded and fleshed them out with editpoly then made the box with a cylinder, again using extrusions, bevels, and insets. The feather was made with a spline with was then extruded, in a similar fashion as the Shurikens. That's about it, been a while since I did one of these. __________________ Supporter of Good Crits My Portfolio

Bookmarks
Digg	del.icio.us	StumbleUpon	Google

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2008, 04:49 AM	#41 (permalink)
Soulis Game Art Student 7 - 3	Hi everyone, i've been following these comps for a while and finally decided to get in on this one. I'm still practicing to getting faster, as I ran out of time pretty quickly it seemed like. Also need to work on cutting down on unnecessary polys, of which I had tons of this time. My entry is a WW2 Haversack and M1 Garand Ammo. Not very original i'll grant, but i'll try and do something more creative for a second entry or the next modeling challenge.

12-10-2008, 07:28 AM	#47 (permalink)
Aegis Amateur Artist 2 - 0	Booo. Runned out of time. Anyway. Here it is.