SMC #50 - September 07 - September 14 - Explosives

Craig Lewis · 07-09-2008, 09:33 AM

You can model whatever you like so long as its some sort of explosive. Grenades, bombs, rockets, mines etc. Real or made up. So long as it explodes, I'll be happy

Feld · 07-09-2008, 01:12 PM

Here's my entry:

Pretty much just primitives...

HollowIchigoBanki · 07-09-2008, 02:39 PM

This looks good i am going to have to give it a go!

Tom · 07-09-2008, 03:50 PM

I might participate for once

just have to figure out what to spend that much time on. pipeboms and such usually dont take me very long hehe.

hankin · 07-09-2008, 04:12 PM

hey

here is my attempt at a land mine, this is my first competition ever, was really enjoyable

bottom was made from cylinder, top was a sphere

showNOmercy · 07-09-2008, 06:36 PM

Hello hankin, welcome to game-artist.net. One small but big thing about your model is the lack of smoothing groups. Figure that out and it will help a lot. By the way, what program are you using?

hankin · 08-09-2008, 05:38 AM

thanks for the advice, I've added smoothing onto the model and replaced the original picture. I'm currently using lightwave 3D

Addi · 08-09-2008, 01:41 PM

71 Minutes
8926 tris

Notes :-

Started out with a box, added wires with splines, pipe bombs are cylinders, straps were from splines.
Semi clear Planes in the document holder are plastic sheets with nut/pelets (these are about 1k a piece but on an actual model I'd use them to bake out normals.)

enjoy, ty

JimmY-DigitaL · 08-09-2008, 04:02 PM

Modelled the grenade first, quick line + lathe modifier. Convert to edit poly. Extruded the tail.
The microwave was done with a chamfer box, I cloned a part of it to become the door. Added some details like handles and buttons.

Edit: This is my first entry, I made an extra one this week (the suicide terrorist).

TomClancey · 08-09-2008, 04:23 PM

Here's my entry for the Explosives contest:

I started with a cylinder and modified it to the likings of the base, pretty much did that for everything. The pin (which is for stringing together several into a trip-wire) was created with a 250 unit long cylinder, added 128 segments (probably too many) and bend-modified it 900 degrees. I also made it 32 sides, thought it was only 10, heh...

That's about it, enjoy.

C&C Appreciated.

07-09-2008, 09:33 AM	#1 (permalink)
Craig Lewis Industry Artist 891 - 74	SMC #50 - September 07 - September 14 - Explosives You can model whatever you like so long as its some sort of explosive. Grenades, bombs, rockets, mines etc. Real or made up. So long as it explodes, I'll be happy __________________

07-09-2008, 01:12 PM	#2 (permalink)
Feld Senior Member 179 - 2	Here's my entry: Pretty much just primitives... __________________ My DeviantArt

08-09-2008, 01:41 PM	#8 (permalink)
Addi Amateur Artist 417 - 21	BriefCase Bomb 71 Minutes 8926 tris Notes :- Started out with a box, added wires with splines, pipe bombs are cylinders, straps were from splines. Semi clear Planes in the document holder are plastic sheets with nut/pelets (these are about 1k a piece but on an actual model I'd use them to bake out normals.) enjoy, ty __________________ My Portfolio Last edited by Addi; 08-09-2008 at 01:44 PM. Reason: fail spelling

08-09-2008, 04:02 PM	#9 (permalink)
JimmY-DigitaL Frequenter 91 - 5	Modelled the grenade first, quick line + lathe modifier. Convert to edit poly. Extruded the tail. The microwave was done with a chamfer box, I cloned a part of it to become the door. Added some details like handles and buttons. Edit: This is my first entry, I made an extra one this week (the suicide terrorist). Last edited by JimmY-DigitaL; 12-09-2008 at 08:11 PM.

08-09-2008, 04:23 PM	#10 (permalink)
TomClancey New Member 45 - 6	Here's my entry for the Explosives contest: I started with a cylinder and modified it to the likings of the base, pretty much did that for everything. The pin (which is for stringing together several into a trip-wire) was created with a 250 unit long cylinder, added 128 segments (probably too many) and bend-modified it 900 degrees. I also made it 32 sides, thought it was only 10, heh... That's about it, enjoy. C&C Appreciated. __________________ Oasis-Games

07-09-2008, 02:39 PM	#3 (permalink)
HollowIchigoBanki Senior Member 552 - 34	This looks good i am going to have to give it a go!

07-09-2008, 03:50 PM	#4 (permalink)
Tom Game Art Student 670 - 41	I might participate for once just have to figure out what to spend that much time on. pipeboms and such usually dont take me very long hehe.

07-09-2008, 06:36 PM	#6 (permalink)
showNOmercy Elderly Artist 352 - 50	Hello hankin, welcome to game-artist.net. One small but big thing about your model is the lack of smoothing groups. Figure that out and it will help a lot. By the way, what program are you using?

08-09-2008, 05:38 AM	#7 (permalink)
hankin New Member 2 - 0	thanks for the advice, I've added smoothing onto the model and replaced the original picture. I'm currently using lightwave 3D

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode