SMC #69 - June 7 - June 14 - Gas Mask

myles · 07-06-2009, 08:00 PM

Forgotten how fun these are,
Ran out of time on this one, had much more stuff planned with the actual mask. 177,000 Tri's

swizzle · 07-06-2009, 08:12 PM

I just registered here, so I figured this'd be a good way to start things off.

beartraps · 07-06-2009, 10:15 PM

first entry, im not pleased with the tubes and some of the design aspects.

Abeaver · 07-06-2009, 11:42 PM

Wow only 50 mins. this shall be tough

Raymondl · 08-06-2009, 10:41 AM

Like most of the guys been reading, and not posting thought I'd start off with a challenge.
I'll post up and introduction later tomorrow its late now here in Sydney, hehe.

pAldred · 08-06-2009, 05:55 PM

dieone, I really like your gas mask. Here is my entry!

Program used: 3Ds Max 9
Tris: 78,524
Time: 50 min

Enjoy!

Abeaver · 08-06-2009, 10:58 PM

Paldred I likes your model good job

beartraps · 09-06-2009, 12:10 AM

thanks paldred, yours looks dope as well. some nice looking entries so far

dabarker · 09-06-2009, 12:16 AM

I am the new guy! O wait... hi swiz and ray.

07-06-2009, 05:44 PM	#1 (permalink)
Craig Lewis Industry Artist 955 - 200	SMC #69 - June 7 - June 14 - Gas Mask __________________

07-06-2009, 08:00 PM	#2 (permalink)
myles Teenage Artist 413 - 56	Forgotten how fun these are, Ran out of time on this one, had much more stuff planned with the actual mask. 177,000 Tri's __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

07-06-2009, 11:42 PM	#5 (permalink)
Abeaver Senior Member 212 - 28	Wow only 50 mins. this shall be tough __________________ My Web Page LinkedIn Profile

08-06-2009, 05:55 PM	#7 (permalink)
pAldred Senior Member 368 - 33	dieone, I really like your gas mask. Here is my entry! Program used: 3Ds Max 9 Tris: 78,524 Time: 50 min Enjoy! __________________ Projects I'm working on: Tactical-Assault Portfolio - www.compnext.com LinkedIn - http://www.linkedin.com/in/pAldred Last edited by pAldred; 08-06-2009 at 06:00 PM.

08-06-2009, 10:58 PM	#8 (permalink)
Abeaver Senior Member 212 - 28	Paldred I likes your model good job __________________ My Web Page LinkedIn Profile

07-06-2009, 08:12 PM	#3 (permalink)
swizzle New Member 2 - 0	I just registered here, so I figured this'd be a good way to start things off.

07-06-2009, 10:15 PM	#4 (permalink)
beartraps Senior Member 275 - 43	first entry, im not pleased with the tubes and some of the design aspects.

08-06-2009, 10:41 AM	#6 (permalink)
Raymondl New Member 3 - 0	Like most of the guys been reading, and not posting thought I'd start off with a challenge. I'll post up and introduction later tomorrow its late now here in Sydney, hehe.

09-06-2009, 12:10 AM	#9 (permalink)
beartraps Senior Member 275 - 43	thanks paldred, yours looks dope as well. some nice looking entries so far

09-06-2009, 12:16 AM	#10 (permalink)
dabarker New Member 24 - 1	I am the new guy! O wait... hi swiz and ray. Last edited by dabarker; 09-06-2009 at 12:19 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode