GAMC #3 - AtsEst

AtsEst · 24-09-2009, 08:16 AM

So I'm planning to enter, but I've got a question before I dive in.
Would adjusting the placement of the wings be too big of a change. The main wings to the back and the smallish wings to the front part to make it look a bit more aggressive and agile?
Thx.

/Ats

iansmithArtist · 24-09-2009, 04:06 PM

If I understand you correctly it dos'nt sound like to much of a change to me but of course it depends how far you push them towards the back or front. Best way to find out is to post an work in progress.

AtsEst · 25-09-2009, 09:48 AM

I was thinking in the lines of this, which frankly is quite a bit.(this is a subD of a doodle just to iron out the shape)

Tiros · 25-09-2009, 11:14 AM

Hmm, it's a little off the concept, I'm thinking that re-doing the back air-intake to be more similar would do the trick

AtsEst · 25-09-2009, 11:21 AM

Quote:

Originally Posted by Tiros

Hmm, it's a little off the concept, I'm thinking that re-doing the back air-intake to be more similar would do the trick

Again thanks man

Off to modeling now.

/Ats

AtsEst · 26-09-2009, 08:46 AM

Here is the half finished highpoly:

Going to finish it up tonight. The the lowpoly, uv, bake and texturing will hopefully be done tomorrow.(Ahhh, should have began earlier

).

*Edit*

Ok the hp is finished(nuts and bolts will be added by hand).

*Edit,edit*

Lol I forgot the cam

Today was long but tomorrow will be even longer...

/Ats

taemoor · 26-09-2009, 05:58 PM

I think its one of the best deviations in this competition.... But I am afraid they wont accept that much

neenerpants · 26-09-2009, 09:21 PM

I think it's close enough, personally. it's clearly still based on the original concept. just my opinion, of course.

AtsEst · 27-09-2009, 03:46 AM

Thanks guys,

I'm not to worried about the comp but rather happy to gain a asset for my portfolio.
We'll see what the mods say.

AtsEst · 27-09-2009, 07:40 AM

Lowpoly done, uv, bake, and texturing left,

zomg!!!

*Edit
After F1, eating and homework the UV's are done(not very pretty might I add), baking as we speak.

*Edit*edit*

I f'ed up the uv's so this is it for me, no time to do em over.

I'll finish it up in some time and post the finished product in finished projects when I have time

Good luck to everyone else.

/Ats

24-09-2009, 08:16 AM	#1 (permalink)
AtsEst New Member 42 - 11	GAMC #3 - AtsEst So I'm planning to enter, but I've got a question before I dive in. Would adjusting the placement of the wings be too big of a change. The main wings to the back and the smallish wings to the front part to make it look a bit more aggressive and agile? Thx. /Ats

25-09-2009, 11:14 AM	#4 (permalink)
Tiros Freelancer 2,472 - 819	Hmm, it's a little off the concept, I'm thinking that re-doing the back air-intake to be more similar would do the trick __________________ - Temp Portfolio \| Sketchbook Thread \| Spec/Normals Tutorial \| Metal Base Tutorial - Supporter of good crits

26-09-2009, 08:46 AM	#6 (permalink)
AtsEst New Member 42 - 11	Here is the half finished highpoly: Going to finish it up tonight. The the lowpoly, uv, bake and texturing will hopefully be done tomorrow.(Ahhh, should have began earlier). Edit Ok the hp is finished(nuts and bolts will be added by hand). Edit,edit Lol I forgot the cam Today was long but tomorrow will be even longer... /Ats Last edited by AtsEst; 26-09-2009 at 03:26 PM.

26-09-2009, 05:58 PM	#7 (permalink)
taemoor New Member 33 - 5	I think its one of the best deviations in this competition.... But I am afraid they wont accept that much __________________ Folio My GAMC # 3 Entry & My submission

27-09-2009, 07:40 AM	#10 (permalink)
AtsEst New Member 42 - 11	Lowpoly done, uv, bake, and texturing left, zomg!!! Edit After F1, eating and homework the UV's are done(not very pretty might I add), baking as we speak. Editedit I f'ed up the uv's so this is it for me, no time to do em over. I'll finish it up in some time and post the finished product in finished projects when I have time Good luck to everyone else. /Ats Last edited by AtsEst; 27-09-2009 at 02:16 PM.

24-09-2009, 04:06 PM	#2 (permalink)
iansmithArtist New Member 11 - 24	If I understand you correctly it dos'nt sound like to much of a change to me but of course it depends how far you push them towards the back or front. Best way to find out is to post an work in progress.

25-09-2009, 09:48 AM	#3 (permalink)
AtsEst New Member 42 - 11	I was thinking in the lines of this, which frankly is quite a bit.(this is a subD of a doodle just to iron out the shape)

26-09-2009, 09:21 PM	#8 (permalink)
neenerpants New Member 43 - 50	I think it's close enough, personally. it's clearly still based on the original concept. just my opinion, of course.

27-09-2009, 03:46 AM	#9 (permalink)
AtsEst New Member 42 - 11	Thanks guys, I'm not to worried about the comp but rather happy to gain a asset for my portfolio. We'll see what the mods say.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode