Killzone 2 "Gas Tank"

VictorSantos · 06-09-2011, 05:11 PM

Hello there,

This is my last work, I saw this awesome concept from Killzone 2 and I thought this could be a nice portfolio piece.

I made it with 3dsMax (6400 tris) and Photoshop for the 2048x2048 texture.

The original concept was made by Leading Light for Killzone 2 (PS3 title).

I hope you like it!

VictorSantos · 06-09-2011, 05:17 PM

Hey! I uploaded a turntable video, this is the link!

TURNTABLE VIDEO

Cheers!!

TheChan · 06-09-2011, 05:27 PM

I think you should use a different lighting setup that shows off your materials better.

airage · 07-09-2011, 06:25 AM

Hey,

i agree with TheChan on the lighting. Currently it looks a little flat and you don't have much highlights. With a better lighting setup the asset would look twice as good.
Your materials could use some more work, especially your specular map. It's not 100% convincing as real metal, it could be read as concrete as well.
You have a lot of noise and small details in the diffuse, but the spec is very flat and boring to look at. I would remove a lot of the high frequency detail from the diffuse and have it only in the spec.
Would be nice if you post wires and texture flats as well

VictorSantos · 21-09-2011, 06:53 AM

Thanks for critics guys, as soon as I got time I'm gonna put it into UDK to make a nice shader for the metal with an upgraded specs.

This is the original concept art:

Cheers!

VictorSantos · 26-10-2011, 09:57 AM

Hi all, after a month without PC (it crashed) I updated the model, this time I rendered it in UDK.

I hope you like it!

Cheers!!

06-09-2011, 05:11 PM	#1 (permalink)
VictorSantos New Member 16 - 2	Killzone 2 "Gas Tank" Hello there, This is my last work, I saw this awesome concept from Killzone 2 and I thought this could be a nice portfolio piece. I made it with 3dsMax (6400 tris) and Photoshop for the 2048x2048 texture. The original concept was made by Leading Light for Killzone 2 (PS3 title). I hope you like it! Attached Images __________________ http://www.theartofvictorsantos.com/

06-09-2011, 05:17 PM	#2 (permalink)
VictorSantos New Member 16 - 2	Hey! I uploaded a turntable video, this is the link! TURNTABLE VIDEO Cheers!! __________________ http://www.theartofvictorsantos.com/

07-09-2011, 06:25 AM	#4 (permalink)
airage Senior Member 168 - 135	Hey, i agree with TheChan on the lighting. Currently it looks a little flat and you don't have much highlights. With a better lighting setup the asset would look twice as good. Your materials could use some more work, especially your specular map. It's not 100% convincing as real metal, it could be read as concrete as well. You have a lot of noise and small details in the diffuse, but the spec is very flat and boring to look at. I would remove a lot of the high frequency detail from the diffuse and have it only in the spec. Would be nice if you post wires and texture flats as well __________________ www.rmgameart.com

21-09-2011, 06:53 AM	#5 (permalink)
VictorSantos New Member 16 - 2	Thanks for critics guys, as soon as I got time I'm gonna put it into UDK to make a nice shader for the metal with an upgraded specs. This is the original concept art: Cheers! __________________ http://www.theartofvictorsantos.com/

26-10-2011, 09:57 AM	#6 (permalink)
VictorSantos New Member 16 - 2	Update! Hi all, after a month without PC (it crashed) I updated the model, this time I rendered it in UDK. I hope you like it! Cheers!! __________________ http://www.theartofvictorsantos.com/

06-09-2011, 05:27 PM	#3 (permalink)
TheChan Senior Member 491 - 171	I think you should use a different lighting setup that shows off your materials better.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode