GAMC #4 - Myles

myles · 26-11-2009, 06:07 AM

Seems I have the time to work on this one, so thought I'd give it a shot. Been a while since I've done anything around here

I'm not following the concept to the book, going for a old generation of Jet Engine (closer to something used in the Vietnam War). It'll will be well used, but not damaged or too grubby. Anyway here's the start of the High Poly, still got a load of details to do around the underneath, and a few modules on the sides.

Production shots for those silly enough to be interested -

http://i460.photobucket.com/albums/q...ambert/One.jpg
http://i460.photobucket.com/albums/q...bert/Two-1.jpg
http://i460.photobucket.com/albums/q...bert/Three.jpg
http://i460.photobucket.com/albums/q...mbert/Four.jpg
http://i460.photobucket.com/albums/q...mbert/Five.jpg
http://i460.photobucket.com/albums/q...ambert/Six.jpg

myles · 26-11-2009, 02:30 PM

About midway with this highpoly now, just got add some sockets, pipes and maybe a wire - perhaps a bolt too!

myles · 27-11-2009, 08:36 AM

Alrighty, I think I'm done with the High Poly, I may end up adding that vertical pipe that everyone else has done, but with many of the fuel injecting pipes I'm worried about hitting a poly count.

urgaffel · 27-11-2009, 09:47 AM

Damn, that's looking pretty cool. Will be interesting to see how you tackle those chunky blocky things on the side of the turbine.

myles · 28-11-2009, 06:52 AM

Okay here's the finished low poly, had to remove some details I wasn't expecting to have to, the exhaust pipes also look a bit blocky, but I think the texture should help that. I've also got a extra 200-300 tri's on the back exhaust which is where quite a lot of unseen detail is going. A bit worried about the bake, so wish me luck!

myles · 28-11-2009, 08:27 AM

Initial bake. Here is a test bake to see how things went, its looking pretty solid at the moment, got a few area's to fix in photoshop but otherwise it went quite well.

Marcus Aseth · 28-11-2009, 12:11 PM

Very good

only thing I am not sure is the junction black line on top of the big & small cylinder,not present in the high poly model,for the rest is a good work (& different from most of the engine,so this is another point at you favor i think

)

myles · 28-11-2009, 02:20 PM

Thanks Marcus, that black line is a baking error where the UV was rendered a few pixels out, I will fix it in photoshop. This was also just a test bake on quickly made UV's so better can be expected

HellraizerHHH5 · 28-11-2009, 02:44 PM

looking great so far myles

Theht · 28-11-2009, 03:25 PM

intessting design. abit too symetrical for my taste at the moment. keep us updated

26-11-2009, 06:07 AM	#1 (permalink)
myles Teenage Artist 416 - 116	GAMC #4 - Myles Seems I have the time to work on this one, so thought I'd give it a shot. Been a while since I've done anything around here I'm not following the concept to the book, going for a old generation of Jet Engine (closer to something used in the Vietnam War). It'll will be well used, but not damaged or too grubby. Anyway here's the start of the High Poly, still got a load of details to do around the underneath, and a few modules on the sides. Production shots for those silly enough to be interested - http://i460.photobucket.com/albums/q...ambert/One.jpg http://i460.photobucket.com/albums/q...bert/Two-1.jpg http://i460.photobucket.com/albums/q...bert/Three.jpg http://i460.photobucket.com/albums/q...mbert/Four.jpg http://i460.photobucket.com/albums/q...mbert/Five.jpg http://i460.photobucket.com/albums/q...ambert/Six.jpg __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

26-11-2009, 02:30 PM	#2 (permalink)
myles Teenage Artist 416 - 116	About midway with this highpoly now, just got add some sockets, pipes and maybe a wire - perhaps a bolt too! __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

27-11-2009, 08:36 AM	#3 (permalink)
myles Teenage Artist 416 - 116	Alrighty, I think I'm done with the High Poly, I may end up adding that vertical pipe that everyone else has done, but with many of the fuel injecting pipes I'm worried about hitting a poly count. __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

27-11-2009, 09:47 AM	#4 (permalink)
urgaffel Administrator 693 - 433	Damn, that's looking pretty cool. Will be interesting to see how you tackle those chunky blocky things on the side of the turbine. __________________ 2D shmup: Ultrablast! Games Industry/Game Art blog

28-11-2009, 06:52 AM	#5 (permalink)
myles Teenage Artist 416 - 116	Okay here's the finished low poly, had to remove some details I wasn't expecting to have to, the exhaust pipes also look a bit blocky, but I think the texture should help that. I've also got a extra 200-300 tri's on the back exhaust which is where quite a lot of unseen detail is going. A bit worried about the bake, so wish me luck! __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

28-11-2009, 08:27 AM	#6 (permalink)
myles Teenage Artist 416 - 116	Initial bake. Here is a test bake to see how things went, its looking pretty solid at the moment, got a few area's to fix in photoshop but otherwise it went quite well. __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

28-11-2009, 12:11 PM	#7 (permalink)
Marcus Aseth Freelancer 371 - 174	Very good only thing I am not sure is the junction black line on top of the big & small cylinder,not present in the high poly model,for the rest is a good work (& different from most of the engine,so this is another point at you favor i think )

28-11-2009, 02:20 PM	#8 (permalink)
myles Teenage Artist 416 - 116	Thanks Marcus, that black line is a baking error where the UV was rendered a few pixels out, I will fix it in photoshop. This was also just a test bake on quickly made UV's so better can be expected __________________ > Portfolio > Support Constructive Criticism Error: The operation completed successfully.

28-11-2009, 02:44 PM	#9 (permalink)
HellraizerHHH5 New Member 65 - 21	looking great so far myles

28-11-2009, 03:25 PM	#10 (permalink)
Theht New Member 42 - 14	intessting design. abit too symetrical for my taste at the moment. keep us updated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode